Products Distributors Contact Links Videos Frequently asked questions
 
Safe Products
back
USV-SV

USB Scope Viewer

Turn your boresope into a digital viewing system!

Connect your borescope eyepiece to your computer with a full digital color screen that allows you to zoom in, correct a mirror image if you are using a mirror tube, make views to document your work or collaborate with a colleague for evaluation over the internet or via SKIPE. Take a snapshot for further study.

This system can be used with free software - for advanced features you can purchase suggested software for a minor fee.

This system works with all borescopes made after 1996, including the most commonly used by safemen... Hawkeye, Olympus and Power Views to name a few. Made of soft nylon and it's light weight (under 2 ounces) assures that the placement on your expensive scope won't damage it. The USB-SV uses low light technology which eliminates the need for an expensive light generator - saving you thousands more.

Software Information

 

USB-SV
LB
Little Buddy
When You Need A Helping Hand
  1. Flexable Octopod Design
  2. Interchangable Heads - Clip or Cradle
  3. Overall length 8" with Clip Head
  4. Extremely Strong Rare Earth Magnets hold firmly onto metal
  5. 35 Moving Parts
  6. Connecting Beads can be rearranged - unlimited applications!
FLB
K-1 Safe Slick

Safe Slick

Safe slick is a specially formulated gel lubricant for the professional locksmith. Use on locking bolts, pivot points, sliding parts, panic hardware and safes. Will not dry out like white grease or become gritty like black grease. Safe Slick is non-penetrating and odorless. Handy 2 oz. size. Made in U.S.A.

 

Material Safety Data Sheet

K-1

Safe Buster With Standard Collar

This tool is used to drill through hardplate. You can apply over 500 lbs of pressure at the drill tip with about 35 lbs. of pressure at the handle. Penetrates most hardplate in minutes instead of hours. Drill Motor Not Included.

K-14

Safe Buster With Milwaukee® Collar

This is the same Tool as the K-14 Safe Buster (pictured above) , but the collar is designed to fit Milwaukee® Drills

K-14-MIL
K-16 Safe Repair Kit

Safe Repair Kit

Developed specifically for locksmiths and safemen, these steel taper pins and corresponding ball bearings will prove invaluable when repairing safes that have been drilled open.

Five sizes of taper pins milled from bar steel to help you repair drill holes from 1/8" to 1/2". Four sizes of corresponding ball bearings to complete a professional repair. Reorder numbers included. Made in the U.S.A.

K-16 parts can be found here

K-16
K-18 Change Key Set

K-18 Change Key Set

How many times have you searched and searched for a particular change key at the bottom of your tool box? Keedex has the solution. The K-18 Change Key Set is a set of the twelve most common change keys, all in a handy case. Keys fold out “knife style” to select the proper tool. Case is engraved with description of uses. Keys are made of stainless steel. Made in U.S.A.

K-18 parts can be found here

K-18

K-GSA • GSA Type Change Key Set

The new Keedex K-GSA, GSA type change key set, is designed for those individuals working in the GSA environment. Contains the keys needed for servicing GSA rated containers. Keys are made of cast stainless steel. Case is engraved with description of uses. Made in USA.

K-GSA parts can be found here

K-GSA
K-23 Scope for Mini-Flashlights

K-23 Scope for Mini-Flashlights

Transforms your mini-flashlight into a powerful inspection device. Works with Mini-Mag Lite®, Brinkman® and many other "AA" flashlights.

The K-23 consists of a 1" diameter polypropylene cap and two interchangeable, fiber optic rods, one 45° and one 90°.

K-23
K-ETD Emergency Transfer Dial

Emergency Transfer Dial

The Keedex K-ETD Emergency Transfer Dial is an efficient tool designed to attach to a safe in a manner in which not to obscure the view of the internal lock after penetration of a safe for opening, thus allowing viewing and dialing at the same time. The transfer dial has two movable indexes to facilitate the transfer of combination numbers.

K-ETD parts can be found here

K-ETD
K-RP Roll Pin Kit

Roll Pin Kit

Contains an assortment of the zinc plated roll pins most commonly used by locksmiths.

Includes sizes 1/16 thru 5/32" in diameter and 3/8 thru 1 1/2" in length. 18 different sizes. 480 pins total. All packed in a durable, 18 compartment plastic box. Re-order numbers included. Made in the U.S.A.

K-RP Replacement parts can be found here

K-RP
K-RP-M Metric Plus Roll Pin Kit

Metric Plus Roll Pin Kit

This kit contains an assortment of metric and fractional roll pins.
Metric sizes: 1.5mm x 18mm and the following sizes in 26mm length: 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 6mm & 8mm.
Fractional sizes: 1" lengths of the following sizes: 1/16", 5/64", 3/32", 1/8",5/32", 3/16", 7/32", 1/4" & 5/16". Quantity: 12 each of the above sizes. 216 pins total. Re-order numbers included. Made in the U.S.A.

K-RP-M Replacement parts can be found here

K-RP-M
LIT-M Fiber optic moonlight

Fiber Optic Moonlight for Mini-MagLite

The Keedex Moonlight attaches to any Mini-Maglite flashlight and is designed to fit into a 1/4” opening for viewing inside of a drilled hole. By inserting the Moonlight into the hole it lights up the inside (of a safe) using 11 fiber-optic elements. The crescent shape “moon” design covers only 20% of the viewing area allowing an 80% non-obstructed view inside the hole with a high-intensity light beam.

The stronger your light source the brighter the Moonlight. Maglite makes 1 and 3 watt bulbs. We highly suggest the 3-watt LED flashlight Maglite features a fast-focus beam that adjusts from spot-to-flood, use the spot light focus.
The Moonlight needs no batteries and has no light bulbs to break. It is made of a highly researched flexible tubing which uses over 22 feet of fiber-optic cable.

LIT-M
K-ETD-MTI Magnetic Transfer Index for K-ETD (1 Magnet, 1 Index)
Magnetic Transfer Index for K-ETD (1 Magnet, 1 Index) ETD-MTI-PK